14 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
arian hoseini am 22 Nov. 2023
Kommentiert: arian hoseini am 23 Nov. 2023
Akzeptierte Antwort: Sai Teja G
In MATLAB Online öffnen
i wanna export whole output in 1 sheet and i wanna know how to export it in separated sheets...
clear all
clc
inputData = [0.001 0.1;
0.003 0.1;
0.006 0.1;
0.1 0.09;
0.3 0.08;
0.5 0.07;
5 0.01;
7 0.005;
8 0.001;
10 0.0001];
numSets = 10; % Number of sets to generate
% Initialize an empty matrix to store the generated data
outputData = zeros(size(inputData, 1), 2, numSets);
for i = 1:numSets
% Generate similar data with increasing amplitude
scalingFactor = i * 0.1;
generatedData = scalingFactor * inputData(:, 1);
sigma = scalingFactor * inputData(:, 2);
% Store the generated data in the output matrix
outputData(:,:,i) = [generatedData,sigma];
Tm=table(outputData(:,1,i),outputData(:,2,i),'VariableNames',{'a','b',});
disp(Tm);
writetable(Tm, 'C:\Users\arian\Desktop/generate sigma.xls' , 'Sheet', 1);
loglog(outputData(:,1,i), outputData(:,2,i), 'DisplayName', sprintf('Generated Data Set %d', i));
end
% Display the generated data for each set
% figure
hold on
for i = 1:numSets
disp(['Generated Data Set ', num2str(i)]);
%disp(outputData(:,:,i));
plot(outputData(:,1,i), outputData(:,2,i), 'DisplayName',["Generated Data Set "+i])
end
hold off
grid
legend('Location','best')
0 Kommentare -2 ältere Kommentare anzeigen-2 ältere Kommentare ausblenden
-2 ältere Kommentare anzeigen-2 ältere Kommentare ausblenden
Melden Sie sich an, um zu kommentieren.
Melden Sie sich an, um diese Frage zu beantworten.
Akzeptierte Antwort
Sai Teja G am 22 Nov. 2023
In MATLAB Online öffnen
Hi Arian,
I understand that you want to export it into serperate sheets.
To export the output data to a single Excel sheet, you would typically create a table for each data set and then write each table to the Excel file in a loop, as you are doing. However, you are currently overwriting the same sheet with each iteration of the loop, which is why only the last data set appears in the Excel file.
To write all data sets to the same sheet, you would need to append each table side by side or one after another within the same sheet. To write data sets to separate sheets, you need to change the 'Sheet' parameter in the `writetable` function to write to a different sheet for each data set.
Here's how you can modify your code to write each data set to a separate sheet:
clear all
clc
inputData = [0.001 0.1;
0.003 0.1;
0.006 0.1;
0.1 0.09;
0.3 0.08;
0.5 0.07;
5 0.01;
7 0.005;
8 0.001;
10 0.0001];
numSets = 10; % Number of sets to generate
% Initialize an empty matrix to store the generated data
outputData = zeros(size(inputData, 1), 2, numSets);
% Path to the Excel file
excelFilePath = 'C:\Users\arian\Desktop\generate_sigma.xlsx';
% Generate and write data to separate sheets
for i = 1:numSets
% Generate similar data with increasing amplitude
scalingFactor = i * 0.1;
generatedData = scalingFactor * inputData(:, 1);
sigma = scalingFactor * inputData(:, 2);
% Store the generated data in the output matrix
outputData(:,:,i) = [generatedData, sigma];
% Create a table for the generated data
Tm = table(outputData(:,1,i), outputData(:,2,i), 'VariableNames', {'a', 'b'});
% Write the table to a separate sheet in the Excel file
writetable(Tm, excelFilePath, 'Sheet', i);
% Plot the data
loglog(outputData(:,1,i), outputData(:,2,i), 'DisplayName', sprintf('Generated Data Set %d', i));
hold on; % Keep the plot hold on for the next data set
end
% Adjust plot settings
grid on;
legend('Location', 'best');
hold off; % Release the plot hold
% Display the generated data for each set
for i = 1:numSets
disp(['Generated Data Set ', num2str(i)]);
disp(outputData(:,:,i));
end
In the above code, I have changed the `writetable` function to write each data set to a separate sheet by using the loop index `i` as the sheet number. Additionally, I've modified the file path to use a backward slash `\` (which is the escape character in MATLAB strings) or you can use a forward slash `/` to avoid escaping characters.
Please make sure that the file path is correct and that you have write permissions to the specified location. Also, the file extension is changed to `.xlsx`, as `.xls` is an older Excel format and may not support multiple sheets as well as the newer `.xlsx` format.
Hope it helps!
4 Kommentare 2 ältere Kommentare anzeigen2 ältere Kommentare ausblenden
2 ältere Kommentare anzeigen2 ältere Kommentare ausblenden
Mathieu NOE am 22 Nov. 2023
Direkter Link zu diesem Kommentar
https://de.mathworks.com/matlabcentral/answers/2050652-how-to-export-data-with-writetable#comment_2971652
fyi , `.xls` is an older Excel format that supports multiple sheets
arian hoseini am 22 Nov. 2023
Direkter Link zu diesem Kommentar
https://de.mathworks.com/matlabcentral/answers/2050652-how-to-export-data-with-writetable#comment_2972317
sorry...i didnt understand the same sheet...i mean how ?can u write that too so i can see the difference?
Walter Roberson am 22 Nov. 2023
Direkter Link zu diesem Kommentar
https://de.mathworks.com/matlabcentral/answers/2050652-how-to-export-data-with-writetable#comment_2972367
Bearbeitet: Walter Roberson am 23 Nov. 2023
In MATLAB Online öffnen
writetable(Tm, excelFilePath);
If you were to use the above command, writetable would automatically write to the first sheet that it finds. If the file did not previously exist, it might create several sheets named things like sheet1 and sheet2 but only the first, sheet1 would be written to. Creation of the extra (unused) sheets when a file is first created is not certain and might depend upon whether writetable has the UseExcel option active.
writetable(Tm, excelFilePath, 'Sheet', 3);
If you were to use the above command, writetable would automatically write to the third sheet it finds. If the file did not previously exist, it could create several sheets named things like sheet1 and sheet2 but only the third sheet would be written to in this example. If the sheet number requested to write to is more than the number of sheets that exist in the file, it will create a new sheet named sheet followed by the sheet number. Creation of the extra (unused) sheets when a file is first created is not certain and might depend upon whether writetable has the UseExcel option active.
writetable(Tm, excelFilePath, 'Sheet', 'disco');
If you were to use the above command, writetable would look for a sheet named disco and write to it if it finds it; if it did not exist then it will create the sheet and write to it. If the file it could create several sheets named things like sheet1 and sheet2 as well. Creation of the extra (unused) sheets when a file is first created is not certain and might depend upon whether writetable has the UseExcel option active.
The sheet names or sheet numbers that you pass in to writetable() do not need to be constants. You can validly use a loop control variable the way that @Sai Teja G showed, such as
for i = 1 : 5
writetable(Tm, excelFilePath, 'Sheet', i);
end
to write to the first 5 sheets (creating sheets if necessary)
arian hoseini am 23 Nov. 2023
Direkter Link zu diesem Kommentar
https://de.mathworks.com/matlabcentral/answers/2050652-how-to-export-data-with-writetable#comment_2972707
thank u sir
Melden Sie sich an, um zu kommentieren.
Weitere Antworten (0)
Melden Sie sich an, um diese Frage zu beantworten.
Siehe auch
Kategorien
MATLABLanguage FundamentalsMatrices and Arrays
Mehr zu Matrices and Arrays finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Es ist ein Fehler aufgetreten
Da Änderungen an der Seite vorgenommen wurden, kann diese Aktion nicht abgeschlossen werden. Laden Sie die Seite neu, um sie im aktualisierten Zustand anzuzeigen.
Translated by 
Website auswählen
Wählen Sie eine Website aus, um übersetzte Inhalte (sofern verfügbar) sowie lokale Veranstaltungen und Angebote anzuzeigen. Auf der Grundlage Ihres Standorts empfehlen wir Ihnen die folgende Auswahl: .
Sie können auch eine Website aus der folgenden Liste auswählen:
Amerika
- América Latina (Español)
- Canada (English)
- United States (English)
Europa
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- Deutsch
- English
- Français
- United Kingdom(English)
Asien-Pazifik
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)
Kontakt zu Ihrer lokalen Niederlassung
